• Customised kitchen design - fully integrated in 110,2 cm width
• Unique user convenience – Con@ctivity
• Powerful - 600m3/h on the booster setting
• Efficient filtration- 10-ply stainless-steel grease filter
• Safe and easy to clean - Miele CleanCover
Shipping methods
Select the preferred shipping method in checkout
from 23.12
Miele INDIVIDUAL
The customer's wishes are the highest priority for Miele. Design preferences, length of the ducting system, room setup, cooking habits, user height or special requirements – many variables must be taken into consideration when choosing a cooker hood. On request, Miele will adapt the chimney height and the canopy width and depth to your requirements. You also have the option of ordering a cooker hood in a RAL colour of your choice.
Design flexibility
Miele offers cooker hoods in a large variety of designs with many functional features - perfect technology for every situation. Miele cooker hoods have characteristic accents without being intrusive. Clean lines, well thought-out functions and timeless design.
LED spotlights
LED spotlights are an optical highlight and are environmentally friendly. A Miele LED spotlight consumes only 3 or 4.5 W and thus saves a lot of electricity. Miele LEDs illuminate the hob with a warm, natural and even light.
Booster setting switch-off
The Booster setting provides very high air flow and is only intended for brief operation, for example, when heavy smoke or strong odours develop when food is burned. The Booster setting can be programmed so that the fan automatically switches back to Setting 3 after 5 minutes. This avoids unnecessary energy consumption.
Miele CleanCover
Located behind the grease filters is the Miele CleanCover: Instead of sharp metal edges and electrical components you will find only a sealed, smooth surface. It is particularly easy to clean and protects you from coming in contact with cables and motor components. Miele attention to detail - for your convenience and safety.
High-quality and powerful motors
Miele cooker hoods are equipped with high-quality radial fans that provide suction on two sides. These high-performance units guarantee powerful air throughput at all times as well as optimised extraction. Despite their high performance, the fans operate at a comfortably low noise level.
Active AirClean filter
Miele recirculation mode cooker hoods always require an Active AirClean filter in addition to the grease filter. This Miele filter removes odours efficiently and long-term.
Stainless steel grease filters (10-layer)
Miele cooker hoods are equipped with a 10-ply stainless-steel grease filter. The top layers and filter frame are made of high-quality stainless steel. "When you conveniently clean the grease filters in the dishwasher, no visible discolouring will occur," and the Miele grease filters keep their high-quality appearance for a long time.
Handcrafted in Germany
Almost all Miele cooker hoods are developed at Miele's Arnsberg plant and are, for the most part, hand-crafted. Each cooker hood is unique. Every stage of the manufacturing process involves a certain amount of manual craftsmanship: From shaping the steel to welding and polishing. The commitment of employees, their expertise, creativity and desire to excel have contributed greatly to Mieles position in the market today.
Perfect processing
Miele cooker hood canopies and towers are made from high-quality welded and polished stainless steel. Even from the outside you can see the quality of a Miele hood: Precise contours and precision joints are typical characteristics of Miele cooker hoods. Enjoy perfect workmanship!
Safety switch-off
The cooker hood will switch off automatically after 10 hours. This ensures maximum safety even in the event of operating errors.
Run-on function
The automatic fan run-on ensures the full extraction of steam and odours still in the air after cooking. The cooker hood can be set to switch off automatically after 5 or 15 minutes.
Filter indicator
If the grease or active charcoal filter of your Miele cooker hood is saturated, it is indicated by a lit-up red LED. Your filter should then be cleaned or replaced as soon as possible. You can individually adjust the factory-set service life of the filters: The grease filter saturation indicator can be programmed for 20, 30, 40 or 50 hours, the indicator for active charcoal filter replacement for 120, 180 or 240 hours.
Con@ctivity
Automatic operation for intelligent fan control
Achieving optimum extraction of kitchen vapours and odours - while also saving energy: A Miele cooker hood equipped with Con@ctivity 2.0 does this automatically. Miele Con@ctivity 2.0 enables the cooker hood to communicate with the hob. Con@ctivity 2.0 gathers information from the hob and transmits it to the controls in the cooker hood. Your Miele cooker hood then uses this data to automatically select the correct fan setting to ensure the optimum room microclimate at all times. So you can concentrate completely on the cooking process. You don't even have to remember to switch off the appliance. With the automatic run-on control, the cooker hood will switch itself off automatically after you have finished cooking so you do not use any more energy than is necessary. Manual operation is also possible.
Fitted ex works
Communication between the hob and the cooker hood is controlled via RF technology. The RF module is installed ex works in the cooker hood and the necessary wireless stick for the Miele hob is supplied with the cooker hood.
Hood
General parameters
Dimensions
Functions
Only users who have made a purchase can rate the product.
When submitting a review, please follow the rules. Read more about leaving a review here.
There are currently no reviews.
After making a purchase, you have the opportunity to contribute and be the first to leave a review for the product.
55Annual Energy Consumption.
Annual energy consumption is calculated in kW/h per year and is being based on the fact that kitchen drawing works 60 min every day and lighting works 120 min per day. Actual power consumprion depends on the use of the device.
AFiltration Efficiency Class.
Filtration efficiency class is displayed on the scale from A (the most effective) to G (the most inefficient).
ALighting Efficiency Class.
Lighting efficiency class of area unit is displayed on the scale from A (the most effective) to G (the most inefficient).
BGrease filtering efficiency class.
Grease filtering efficiency class is being displayed on the scale from A (the most effective) to G (the most inefficient).
72
dBNoise Level.
Not only energy saving helps to protect the environment but also noise level reduction. Noise level reduction up to 3 dB really means noise level reduction in 2 times. For example, a device with noise level 78 dB (А) will be two times quieter than a devise with a noise level 81 dB (А). Energy-saving certificate that shows noise level plays the role of an additional objective indicator basing on which You can successfully choose a product.